İzmir Dişhekimleri Odası 30. Uluslararası Bilimsel Kongre ve Sergisi, İzmir, Turkey, 24 - 26 November 2023
Topographical Analysis of One Curve and WaveOne Gold File Systems after Different Uses
Gülsen Kiraz1, Arzu Kaya Mumcu1, Safa Kurnaz1,
1Department of Endodontics, Faculty of Dentistry, Kütahya Health Sciences University, Kütahya, Turkey
Aim: The aim of this study was to evaluate changes in the surface characteristics of reciprocal and rotary instruments following repeated use in curved root canals, as well as the topographic changes in seperated instruments.
Materials and Methods: Fourteen curved simulated acrylic blocks were prepared using One Curve (n=5) and WaveOne Gold (n=5) files. Each file group was divided into subgroups, including control, 1st use, 2nd use, 3rd use, and separated files. During preparation, irrigation with 2 mL of 2.5% sodium hypochlorite (NaOCl) was performed with each pecking or 3 mm forward-backward movement. After the initial use, the files underwent ultrasonic cleaning and sterilization procedures, followed by examination of the surface characteristics of the apical 3 mm of the files under scanning electron microscopy (SEM). These procedures were repeated with each file until instrument fracture, and changes in the surface characteristics of a total of 10 files, including the broken ones, were examined at magnifications of x100, x500, x2000, and x10000 under SEM. Descriptive data were reported for each group.
Results: As the number of uses increased in both groups, cracks, flattening, deterioration of cutting edges, microcavities on the file surfaces, debris, and smearing were observed with increasing frequency. In the One Curve group, flattening of the file was first observed after the 3rd use, while in the WaveOne Gold group, flattening was observed after the 6th use. A fracture of the One Curve file occurred after the 8th use, while a file fracture in the WaveOne Gold group was observed after the 6th use. Morphological examination of the cross-sections of the broken pieces revealed pitting corrosion in wide areas.
Conclusion: Repeated use led to an increase in defects and deformations in both files. When evaluating the surface characteristics of both files, single-use applications of One Curve and WaveOne Gold files are considered safer.
Keywords: Topographic change, NiTi, One Curve, WaveOne Gold, SEM.
One Curve ve WaveOne Gold Eğe Sistemlerinin Farklı Kullanımları Sonrasında Topografik Analizleri
Gülsen Kiraz1, Arzu Kaya Mumcu1, Safa Kurnaz1,
1Kütahya Sağlık Bilimleri Üniversitesi, Diş Hekimliği Fakültesi, Endodonti Anabilim Dalı, Kütahya, Türkiye
Amaç: Bu çalışmanın amacı, kurvatürlü kök kanallarında resiprokal ve rotasyonel hareketle kullanılan aletlerin farklı sayılarda kullanımının ardından aletlerin yüzey özelliklerinde meydana gelen değişiklikleri ve kırılan aletlerin topografik değişikliklerini değerlendirmektir.
Gereç ve Yöntemler: One Curve (n=5) ve WaveOne Gold (n=5) eğeleri kullanarak 14 adet kurvatürlü simüle akrilik blok üzerinde preparasyon yapıldı. Her eğe grubu, kontrol, 1. kullanım, 2. kullanım, 3. kullanım ve kırılan eğe olmak üzere alt gruplara ayrıldı. Preparasyon sırasında her gagalama hareketi veya 3 mm'lik ileri geri hareket sırasında 2 ml %2,5 sodyum hipoklorit (NaOCl) ile irrigasyon yapıldı. İlk kullanım sonrasında eğeler ultrasonik banyo ve sterilizasyon prosedürlerine tabi tutuldu, ardından eğelerin apikal 3 mm'lik kısmının yüzey özellikleri taramalı elektron mikroskobu (SEM) altında incelendi. Bu prosedürler, aletler kırılana kadar her kullanımda tekrarlandı ve kırılan aletler dahil olmak üzere toplamda 10 eğenin yüzey özelliklerinde meydana gelen değişiklikler, SEM altında x100, x500, x2000 ve x10000 büyütme ile incelendi. Her grup için tanımlayıcı veriler raporlandı.
Bulgular: Her iki grupta kullanım sayısı arttıkça çatlakların, düzleşmenin, kesici kenarlarda bozulma ve küntleşmenin, eğe yüzeylerinde mikrokavitelerin, debris ve çapakların arttığı gözlemlendi. One Curve grubunda eğenin düzleşmesi ilk kez 3. kullanım sonrasında görülürken, WaveOne Gold grubunda eğenin düzleşmesi 6. kullanımda ortaya çıktı. One Curve eğesinde sekizinci kullanımda bir kırılma meydana gelirken, WaveOne Gold eğesinde 6. kullanımda eğe kırığı gözlemlendi. Kırılan parçaların kesitleri morfolojik olarak incelendiğinde, geniş alanlarda pitting korozyonu gözlemlendi.
Sonuçlar: Kullanım sayısı arttıkça, her iki eğede de defektlerin ve deformasyonların arttığı gözlenmiştir. Her iki eğenin yüzey özellikleri değerlendirildiğinde, One Curve ve WaveOne Gold eğelerinin tek kullanımlarının daha güvenli olduğu düşünülmektedir.
Anahtar Kelimeler: Topografik değişiklikler, NiTi, One Curve, WaveOne Gold, SEM.