HİBRİT CAD/CAM MATERYALLERİNDE TERMAL YAŞLANDIRMANIN YÜZEY PÜRÜZLÜLÜĞÜNE VE BİYOUYUMLULUĞA ETKİSİNİN İNCELENMESİ


Keski A., Çölgeçen Ö., Karadeniz Saygılı S. , Çal E.

Uluslarası Diş Hekimliği ve Sağlık Kongresi, İzmir, Türkiye, 28 - 29 Kasım 2020, ss.427-428

  • Yayın Türü: Bildiri / Özet Bildiri
  • Basıldığı Şehir: İzmir
  • Basıldığı Ülke: Türkiye
  • Sayfa Sayıları: ss.427-428

Özet

Introduction and Purpose: Hybrid ceramics have superior properties such as physical prope

rties similar to natural teeth, high polishability and easy repair. The aim of this study is to exa

mine the changes in surface roughness and biocompatibility of different hybrid ceramics due t

o thermal aging.

Material and Methods: In this study, hybrid ceramic materials (Lava ultimate-LU; Cerasmart-

CS; Enamic-EN) were compared with the control group (MarkII-M2). Polishing process was

applied to all samples by using polishing kit and diamond polishing paste by same operator.

Surface roughness and cytotoxicity were measured before and after thermal aging. Thermal

aging was applied in the range of 5-55 °C as 10000 cycles. Cytotoxicity was evaluated by MTT

viability test. Paired-samples t test, one-way ANOVA and Tukey 's multiple comparison tests

were used for statistical analysis. P<0.05 were considered statistically significant.

Results: Initial and final roughness values of the LU group were found significantly lower than

M2 control group (p = 0.001). The roughness of the EN group was similar to M2 (p = 0.533)

but was significantly higher than other hybrid ceramics (p <0.001). EN was significantly higher

than M2 in initial cell viability values (p = 0.002), but other hybrid ceramics were found similar.

There was no significant difference between the groups in cell viability after aging (p = 0.180).

Cell viability values increased significantly in the CS group (p = 0.028) with the effect of aging,

whereas it decreased significantly in the EN group (p = 0.049).

Conclusion: Thermal aging slightly increased surface roughness of hybrid ceramics. However,

it doesn't cause an increase in roughness that would impair clinical usability. Thermal aging

affects the biocompatibility of hybrid ceramics. Although the EN hybrid ceramic material was

initially more biocompatible than CS, LU and M2 ceramics, similar biocompatibility was

observed in all ceramic materials after aging.